No Products in the Cart
Changing a watch strap is a process that involves removing the old strap from the watch case and replacing it with a replacement strap. This is advantageous if your current strap is worn out or broken, if you want to change the look of your watch, or if you need to switch your current strap for one which is more appropriate for a certain occasion.
Measure the width between your watch lugs (where the strap attaches to the watch) to make sure you’re buying the right size strap. A strap too big will bunch up and pop off or won’t fit on. A strap too small will have an unsightly gap or an annoying shifting motion as your watch moves separately from your strap.
Get the right length
Most watch straps come in a standard length that will fit most wrists. If your wrists are very big or very small, you might want to consider getting or shorter or longer strap. Measure the size of your wrist with a soft tape measure or wrap a piece of paper around your wrist and then lay it flat and measure it.
Get the right tools
Watch straps are removed with a spring bar tool. Cheap ones cost around $10 and make it a lot easier to get your old strap off and your new strap on. In a pinch, you can use a small screwdriver or a knife. You’ll also need a soft cloth for your watch to rest on so it doesn’t get scratched. If your watch has no strap on at all, it might be missing the spring bars. You can buy new ones for a few dollars, although a few strap companies include spring bars for free. The bars are also measured in millimeters and will need to be bought to size.
Check the hardware
Rarely, some watch straps are sold without buckles, so check the listing before you buy. You don’t want to end up buying a nice strap only to find out you must also buy a buckle to go along with it. On the other hand, you might want to replace the standard buckle with a new one that matches your case. Most replacement watch strap hardware is brushed or stainless steel, so if you have a watch case that is neither of those two colors, you might want to look into getting matching hardware somewhere else. Common other colors include gold, rose gold and black.
Yes, most of our watch straps are interchangeable and can be easily swapped to change the look of your watch. Our carefully selected assortment of straps allows you to change the style of your watch depending on occasion, mood and personal preference.
If you have a Solo Loop or Braided Solo Loop, simply pull from the bottom of the band to stretch it over your wrist when you put it on and take it off. In 2018, the Milanese Loop was redesigned so that you could open the band completely by sliding the magnetic closure through the band connector, or lug. On earlier Milanese Loop models, the closure won't slide through the lug.
Never force the band into the slot. If you don't feel or hear a click, slide the band to the left, then to the right. If the band is installed properly, it won’t freely slide until you hold down the band release button. If the band still doesn’t lock, center the band, and push it into place. Then carefully wiggle the band up and down. Don't wear your Apple Watch if the band is sliding.
Make sure that you use a band that corresponds to your Apple Watch case size. You can use a band that's designed for Apple Watch (1st generation) and Apple Watch Series 1, 2, and 3 with Apple Watch Series 4 and later and Apple Watch SE as long as the sizes are compatible:
People come in all shapes and sizes, though, and so do tastes. Some women will want the bigger Apple Watch, and some men, the smaller. Some people with small wrists will want the bigger watch and vice versa. Since Apple only offers some bands in some sizes, if you have your heart set on a certain band, you may have to be willing to go with the size that matches it. That said, you can get 3rd-party knockoffs for everything in every size and then some, so it doesn't truly matter if you're looking for the best Apple Watch bands.
These lengths can be added to the Apple Watch size to approximately equal the circumference of your wrist, give or take a few millimeters. We recommend using Apple's watch band size chart for the best fit, but these measurements can still come in handy!
If you are looking for a kid size Apple Watch band, the 130 mm may be your best option. You can also shop third-party watch bands specifically made for children with smaller wrists!
Apple Watch comes with bands that are easy to mix and match any band with any watch. You can swap them out as your heart desires without the aid of any tools—as long as the band and watch are the same size. Apple has its own proprietary system to make switching bands easy—but that also means you probably won’t be able to swap in just any band. And even if Apple’s bands fit your watch, the finish might be different: The solid-gold hardware accents on the rose gray Modern Buckle band won’t match the anodized aluminum finish of the Apple Watch Sport, for example.
However, there are other sellers like WristWatchStraps.co who gives you wide range of variety to choose from without any limitations. You can get any Watch band you want for your Apple watch starting from $5.
There are so many Apple Watch band options that they're often categorized by the material. Have you ever wondered which material is the best for an Apple Watch band? Which one is the most Cool? Durable? Or fashionable?
Metals commonly used for an Apple Watch Band include platinum, gold, stainless steel, and titanium.
Leather Apple Watch bands can go with formal and casual attire as they are elegant yet low-profile.
Nylon is a tough synthetic fabric or polyester and is incredibly easy to produce. You can buy nylon Apple Watch bands with varied patterns and colors that don't cost much.
Silicone is swim-proof and sweat-proof - great news for sportspeople. Unfortunately, it's a dust magnet, attracting masses of dust particles compared to other materials, so it needs to be cleaned regularly.
Ceramic, harder than stainless steel or gold, is challenging to work with, which means it's not an everyday watch or watch band material. It does, of course, fit the "luxury" range, so companies manage to process it into watch faces and bands.
If you want to replace Apple Watch band for your apple watch, you may have to pay handsomely for it. Pricing for Apple's watch bands starts at $49 for its synthetic rubber bands and runs up to $449 for the link bracelet. All bands cost the same regardless of which model — 38mm or 42mm — watch they're made for or what size they're available in. All pricing options are below:
Apple didn't discuss the possibility of using a watch band made by another manufacturer at all, but it's easy to imagine that a lot of custom bands will pop up quickly. That should give buyers plenty of options, should they not be interested in what Apple is offering — or the prices that it's offering them at. There are other seller like WristWatchStraps.co who gives you wide range of variety to choose from and at affordable price starting with $5, and up to $50.
The great news is that most watch bands are replaceable, and it’s not as difficult as you might think to find a replacement band that fits your timepiece. In this article, we’ve outlined the steps you need to take to measure your watch band size for replacement and shared some of our favorite replacement watch bands for Apple Watch. We want to hear from you- what type of apple watch band do you think is cool? Let us know in the comments below. Thanks for reading!
Follow us for more information and updates, wristwatchstraps.